首页 » TECHNYL » SLIDE » TECHNYL SLIDE A 216 V30 TF15 BK

TECHNYL® SLIDE A 216 V30 TF15 BK

30% Glass Fiber Reinforced Wear-Resistant PA66 · Excellent Tribological Properties · High Rigidity

30% Glass Fiber
Wear Modified
Excellent Tribology
High Rigidity

TECHNYL® SLIDE A 216 V30 TF15 BK is a 30% glass fiber reinforced polyamide 66 (PA66) grade, specially modified to offer excellent tribological properties for injection molding. This grade combines high rigidity, high strength, and good wear resistance, making it an ideal material choice for applications requiring both high mechanical performance and low coefficient of friction in sliding applications.

📋 Product Overview

  • Polymer Type: PA66 (Polyamide 66)
  • Reinforcement: 30% Glass Fiber
  • Tribological Properties: Excellent tribological properties (TF15 modified)
  • Heat Stabilized: No
  • Flammability Rating: UL94 HB (0.75mm)
  • Processing: Injection Molding
  • Color: Black
  • Certifications: RoHS, REACH
  • Typical Applications: Sliding components, Gears, Bearing cages, Transmission parts

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.48 g/cm³
Humidity Absorption (23°C / 50% RH) ISO 62 2.1 – 2.3 %
Water Absorption (24h, 23°C) ISO 62 0.7 – 0.8 %

Mechanical Properties (DAM)

Property Standard Value Unit
Tensile Modulus ISO 527-1/-2 10000 MPa
Stress at Break ISO 527-1/-2 155 MPa
Strain at Break ISO 527-1/-2 2.5 %
Flexural Modulus ISO 178 9500 MPa
Flexural Strength ISO 178 225 MPa
Charpy Impact Strength (+23°C) ISO 179/1eU 50 kJ/m²
Charpy Notched Impact (+23°C) ISO 179/1eA 11 kJ/m²
Izod Impact Strength (+23°C) ISO 180/1U 50 kJ/m²
Izod Notched Impact (+23°C) ISO 180/1A 10 kJ/m²

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 262 °C
HDT (0.45 MPa) ISO 75 260 °C
HDT (1.80 MPa) ISO 75 250 °C
Vicat Softening Temperature ISO 306 255 °C

Electrical Properties

Property Standard Value Unit
Volume Resistivity IEC 62631-3-1 1.0E+13 ohm.m
Surface Resistivity IEC 62631-3-1 1.0E+13 ohm

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 HB
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min

🔄 Excellent Tribological Properties · Ideal for Sliding Components

TECHNYL® SLIDE A 216 V30 TF15 BK is specially modified with TF15 technology to offer excellent tribological properties:

  • Low Coefficient of Friction: Excellent surface sliding performance, reduces energy loss in moving parts
  • Good Wear Resistance: Extends service life of sliding components
  • 30% Glass Fiber Reinforced: Provides high rigidity and high strength for load-bearing components
  • High Heat Deflection Temperature: HDT of 250°C at 1.80MPa

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
🔥 Recommended Melt Temperature
280 – 300°C
🏭 Recommended Mold Temperature
80 – 120°C
(Up to 120°C for high surface quality)

⚠️ Injection Advice

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

For reinforced polyamides, DOMO recommends the use of steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).

🎯 Target Applications

⚙️ Gears
Drive gears, worm gears
🔧 Bearing Cages
Sliding bearings, roller cages
🏭 Sliding Components
Slides, sliders, bushings
⚡ Transmission Parts
Cams, ratchets, actuator components

🌟 Key Advantages

  • ✅ Excellent Tribological Properties: TF15 special modification, low coefficient of friction, good wear resistance
  • ✅ High Rigidity: 30% glass fiber reinforcement, tensile modulus 10000 MPa, flexural modulus 9500 MPa
  • ✅ High Strength: Tensile strength 155 MPa, flexural strength 225 MPa
  • ✅ High Heat Deflection Temperature: HDT of 250°C at 1.80MPa
  • ✅ Good Impact Resistance: Charpy notched impact strength 11 kJ/m²
  • ✅ Low Water Absorption: Only 0.7-0.8% water absorption in 24h
  • ✅ High Melt Temperature: Recommended processing temperature 280-300°C for high-temperature applications
  • ✅ RoHS & REACH Compliant: Meets global environmental regulations

📌 Material Selection Guide

Component Recommended Grade Key Properties
Drive Gears SLIDE A 216 V30 TF15 BK Low friction, high rigidity, wear resistant
Bearing Cages SLIDE A 216 V30 TF15 BK High rigidity, low friction, heat resistant
Sliding Guides SLIDE A 216 V30 TF15 BK Low coefficient of friction, high load capacity, dimensional stability

📊 TECHNYL SLIDE Series Comparison

Grade GF Content Tensile Modulus Tensile Strength HDT @ 1.8MPa Tribological Mod.
SLIDE A 216 Y10 NC Unreinforced 3550 MPa 90 MPa 80°C Yes
SLIDE A 216 V30 TF15 BK 30% 10000 MPa 155 MPa 250°C TF15

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL SLIDE A 216 V30 TF15 BK, Document PID-000068)

Last Updated: May 2026

error: Content is protected !!