TECHNYL® A 216 V30 NC
30% Glass Fiber Reinforced PA66 · High Rigidity & Strength · Excellent Overall Performance
High Rigidity
High Strength
Multiple Colors
TECHNYL® A 216 V30 NC is a 30% glass fiber reinforced polyamide 66 (PA66) grade, specifically developed for injection molding. This grade offers an excellent combination of thermal and mechanical properties, featuring high rigidity, high strength, good impact resistance, and high heat deflection temperature. It is an ideal material choice for outdoor applications, white goods/small appliances, and sporting goods.
📋 Product Overview
- Polymer Type: PA66 (Polyamide 66)
- Reinforcement: 30% Glass Fiber
- Flammability Rating: UL94 HB (0.75/1.5/3.0mm)
- Processing: Injection Molding
- Colors Available: Black, Grey, Red, Natural, White
- Certifications: RoHS, REACH, UL Yellow Card
- Typical Applications: Outdoor Applications, White Goods/Small Appliances, Sporting Goods
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (DAM / Conditioned)
Thermal Properties
Electrical Properties
Flammability
✅ UL Yellow Card available (QMFZ2.E44716)
🌟 Key Advantages
- ✅ High Rigidity: 30% glass fiber reinforcement, tensile modulus 10000 MPa, flexural modulus 9100 MPa
- ✅ High Strength: Tensile strength 190 MPa, flexural strength 305 MPa
- ✅ High Heat Deflection Temperature: HDT of 255°C at 1.80MPa and 260°C at 0.45MPa
- ✅ Excellent Electrical Properties: Dielectric strength up to 40 kV/mm
- ✅ Good Impact Resistance: Charpy notched impact strength 12 kJ/m² (DAM)
- ✅ Good Dimensional Stability: Molding shrinkage of only 0.4% in parallel direction
- ✅ Multiple Color Options: Black, Grey, Red, Natural, White
- ✅ Wide Certifications: UL Yellow Card, RoHS, REACH
- ✅ Versatile Applications: Outdoor applications, white goods, sporting goods
⚙️ Processing Conditions
80°C / 2-4 hours
Dew point ≥ -20°C
0.2%
270 – 280°C
275 – 285°C
280 – 290°C
70 – 100°C
(Up to 120°C for high surface quality)
⚠️ Injection Advice
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.
For reinforced polyamides, DOMO recommends the use of steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).
🎯 Target Applications
Washing machine components, vacuum cleaner housings, coffee machine parts
Ski bindings, sports equipment frames
Garden tools, outdoor equipment components
Gears, bearings, structural parts
📊 TECHNYL A 216 V30 Series Comparison
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL A 216 V30 NC)
Last Updated: May 2026