TECHNYL® ONE J 60X1 V15 BK
15% Glass Fiber Reinforced High-Temperature Polyamide · Halogen-Free FR · Excellent Electrical Properties · Black Color
15% Glass Fiber
Halogen-Free FR
CTI 600V · PLC 0
TECHNYL® ONE J 60X1 V15 BK is a high-temperature polyamide (PA66/6T copolymer) based material featuring a non-halogenated flame retardant system, reinforced with 15% glass fiber, specifically developed for injection molding. This product offers superior electrical performance compared to traditional high-performance plastics. Its low corrosion characteristic ensures longer processing equipment life. Based on a high fluidity matrix, this product provides strong benefits in productivity and design freedom.
📌 Note: The data provided are based on laboratory/experimental results. These data could be adjusted after industrial production.
📋 Product Overview
- Polymer Type: PA66/6T Copolymer (High-Temperature Polyamide)
- Reinforcement: 15% Glass Fiber
- Flame Retardant System: Halogen-free & Red Phosphorus-free
- UL94 Rating: V0 at 0.75mm; V0/5VA at 1.5/3.0mm
- Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
- Thermal Properties: Melting Point 278°C, HDT 245°C @ 1.8MPa
- Processing: Injection Molding
- Special Features: Low corrosion, High flowability, Heat resistant, Halogen-free FR
- Colors Available: Black, Natural
- Certifications: RoHS, REACH, UL Yellow Card, EN 45545
- Typical Applications: Connectors, Electrical/Electronic Applications
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (DAM)
Thermal Properties
Electrical Properties
Flammability
✅ UL Yellow Card available (QMF22.E44716)
⚡ Excellent Electrical Properties · Ideal for High-Voltage Applications
TECHNYL® ONE J 60X1 V15 BK offers outstanding electrical performance:
- CTI 600V (PLC 0): Highest tracking resistance rating for electrical safety
- Dielectric Strength 35 kV/mm: Excellent insulation performance
- Low Corrosion: Ensures longer processing equipment life
- High Flowability: Enables complex connector designs with thin walls
- EN 45545 Railway Certified: Suitable for railway electrical components
⚙️ Processing Conditions
80°C / 2-4 hours
Dew point ≥ -20°C
0.12% (recommended 0.08-0.12%)
285 – 295°C
290 – 300°C
290 – 300°C
90 – 110°C
(Up to 120°C for high surface quality)
⚠️ Injection Advice
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours, recommended moisture content ≤0.15%.
All reinforced, flame retardant compounds generate some level of abrasion/corrosion to steel processing equipment. DOMO recommends using steel with high chromium and high carbon content (minimum 16% chromium) for equipment in contact with molten flame retardant compounds. Strictly follow recommended processing conditions to prevent corrosion and ensure product performance.
🎯 Target Applications
High-voltage connectors, signal connectors
Charging gun internal parts
Circuit breakers, surge protectors
EN 45545 certified applications
📌 Special Certification: This grade is certified to EN 45545 railway standard, suitable for electrical components in railway vehicles.
🌟 Key Advantages
- ✅ UL94 V0 Flammability: V0 at 0.75mm; 5VA rating from 1.5mm
- ✅ Excellent Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
- ✅ High Heat Resistance: Melting point 278°C, HDT 245°C @ 1.8MPa
- ✅ Low Corrosion: Ensures longer processing equipment life and lower maintenance costs
- ✅ High Flowability: Excellent processability, high productivity, supports complex designs
- ✅ 15% Glass Fiber Reinforcement: Good balance of rigidity and flowability
- ✅ Halogen & Red Phosphorus Free: Environmentally friendly, low smoke, low toxicity
- ✅ EN 45545 Railway Certified: Suitable for railway applications
- ✅ RoHS & REACH Compliant: Meets global environmental regulations
📌 Material Selection Guide
Connectors
ONE J 60X1 V15 BK
CTI 600V, V0 @ 0.75mm, high flowabilityEV Charging Components
ONE J 60X1 V15 BK
High CTI, low corrosion, good electrical insulationRailway Electrical Parts
ONE J 60X1 V15 BK
EN 45545 certified, low smoke, low toxicity
📊 TECHNYL ONE Series Comparison
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL ONE J 60X1 V15 BK, Document PID-001715)
Last Updated: May 2026
📢 Note: Data based on laboratory/experimental results; may be adjusted after industrial production.