首页 » TECHNYL » SAFE » TECHNYL SAFE A 216FC V25 BK


TECHNYL® SAFE A 216FC V25 BK

25% Glass Fiber Reinforced Food Contact Grade PA66 · EU/FDA Certified · Black Color

25% Glass Fiber
🍽️ Food Contact Grade
EU/FDA Certified
CTI 500V

25%
Glass Fiber
🍽️
Food Contact Grade
8500
Tensile Modulus (MPa)
240
HDT (°C @ 1.8MPa)

TECHNYL® SAFE A 216FC V25 BK (previously DOMAMID 66G25FC BK) is a 25% glass fiber reinforced polyamide 66 (PA66) grade with food contact certification (EU/FDA), specifically developed for injection molding. Designed for molded parts requiring food contact compliance in industrial consumer goods and appliance applications, this grade offers excellent mechanical and thermal properties.

📋 Product Overview

  • Polymer Type: PA66 (Polyamide 66)
  • Reinforcement: 25% Glass Fiber
  • Food Contact Certification: EU Food Contact, FDA Certified
  • Heat Stabilized: No
  • Flammability Rating: UL94 HB (0.75/1.5/3.0mm)
  • Processing: Injection Molding
  • Color: Black
  • Certifications: RoHS, UL Yellow Card
  • Typical Applications: Small Appliances, Industrial Applications, Building/Construction, Consumer Goods, Large Appliances

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.32 g/cm³</td
Humidity Absorption (23°C / 50% RH) ISO 62 3.1 – 3.2 %</td
Water Absorption (24h, 23°C) ISO 62 1.2 – 1.3 %</td
Water Absorption (saturation) ISO 62 8.3 %</td
Molding Shrinkage (parallel) ISO 294-4 0.2 – 0.4 %</td
Molding Shrinkage (normal) ISO 294-4 0.8 – 1.0 %</td
Viscosity Number ISO 307 145.0 cm³/g</td

Mechanical Properties (DAM / Conditioned)

Property Standard Value (DAM / Cond.) Unit
Tensile Modulus ISO 527-1/-2 8500 / 6100 MPa</td
Stress at Break ISO 527-1/-2 160 / 110 MPa</td
Strain at Break ISO 527-1/-2 3 / 6 %</td
Flexural Modulus ISO 178 7500 / 4000 MPa</td
Flexural Strength ISO 178 250 / 135 MPa</td
Charpy Impact Strength (+23°C) ISO 179/1eU 60 / 90 kJ/m²</td
Charpy Notched Impact (+23°C) ISO 179/1eA 9.5 / 13 kJ/m²</td
Izod Impact Strength (+23°C) ISO 180/1U 55 / 85 kJ/m²</td
Izod Notched Impact (+23°C) ISO 180/1A 8.5 / 12.5 kJ/m²</td

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 262 °C</td
HDT (0.45 MPa) ISO 75 255 °C</td
HDT (1.80 MPa) ISO 75 240 °C</td
Vicat Softening Temperature ISO 306 250 °C</td

Electrical Properties

Property Standard Value Unit/Rating
Volume Resistivity IEC 62631-3-1 1.0E+13 ohm.m</td
Surface Resistivity IEC 62631-3-1 1.0E+13 ohm</td
Comparative Tracking Index (CTI) IEC 60112 500 V</td
CTI Performance Level IEC 60112 PLC 1 —</td

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 HB</td
UL 94 Flammability 1.5 mm UL 94 HB</td
UL 94 Flammability 3.0 mm UL 94 HB</td
GWFI (1-3 mm) — IEC 60695-2-12 ≥650 °C</td
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min</td

✅ UL Yellow Card available (E170540-102223078)

🍽️ Food Contact Certified · Safe & Compliant

TECHNYL® SAFE A 216FC V25 BK is EU Food Contact Certified and FDA Certified, suitable for applications requiring direct contact with food:

  • EU Food Contact Certified: Complies with EU food contact material regulations
  • FDA Certified: Meets US Food and Drug Administration standards
  • UL Yellow Card Certified: E170540-102223078
  • 25% Glass Fiber Reinforced: High rigidity and strength
  • Excellent Thermal Properties: HDT 240°C @ 1.80MPa
  • Good Mechanical Properties: Tensile modulus 8500 MPa, flexural strength 250 MPa

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
🔥 Recommended Melt Temperature
270 – 290°C
🏭 Mold Temperature
90 – 110°C
(Up to 120°C for high surface quality)

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

For reinforced polyamides, DOMO recommends using steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).

🎯 Target Applications

🏠 Small/Large Appliances
Coffee machines, water dispensers, dishwasher components
🏭 Industrial Applications
Food processing equipment components
🏗️ Building/Construction
Building hardware, pipe components
🍽️ Consumer Goods
Food contact utensils, kitchen products

📎 Download & Support

※ Click download links to access the complete technical datasheet. For any questions, please contact us.

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL SAFE A 216FC V25 BK, previously DOMAMID 66G25FC BK, Document PID-000096)

Last Updated: June 2026

error: Content is protected !!