首页 » TECHNYL » SAFE » TECHNYL SAFE C 216FC V30 BK


TECHNYL® SAFE C 216FC V30 BK

30% Glass Fiber Reinforced Food Contact Grade PA6 · Food Contact Certified · Black Color

30% Glass Fiber
🍽️ Food Contact Grade
Tensile Modulus 9400 MPa
MVR 45

30%
Glass Fiber
🍽️
Food Contact Grade
9400
Tensile Modulus (MPa)
45
MVR (cm³/10min)

TECHNYL® SAFE C 216FC V30 BK (previously DOMAMID 6G30FC 300 BK) is a 30% glass fiber reinforced polyamide 6 (PA6) grade with food contact certification, specifically developed for injection molding. Designed for molded parts requiring food contact compliance in industrial consumer goods and appliance applications, this grade offers excellent mechanical properties, thermal properties, and processing flowability.

📋 Product Overview

  • Polymer Type: PA6 (Polyamide 6)
  • Reinforcement: 30% Glass Fiber
  • Food Contact Certification: Food Contact Grade Certified
  • Flammability Rating: UL94 HB (0.75mm)
  • Processing: Injection Molding
  • Color: Black
  • Certifications: RoHS, REACH, UL Yellow Card
  • Typical Applications: Small Appliances, Industrial Applications, Building/Construction, Consumer Goods, Large Appliances

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.36 g/cm³</td
Humidity Absorption (23°C / 50% RH) ISO 62 2.0 – 2.4 %</td
Water Absorption (24h, 23°C) ISO 62 6.6 %</td
Molding Shrinkage (parallel) ISO 294-4 0.25 – 0.45 %</td
Molding Shrinkage (normal) ISO 294-4 0.9 – 1.1 %</td
MVR (275°C, 5kg) ISO 1133 45.0 cm³/10min</td
Viscosity Number ISO 307 145.0 cm³/g</td

Mechanical Properties (DAM / Conditioned)

Property Standard Value (DAM / Cond.) Unit
Tensile Modulus ISO 527-1/-2 9400 / 5300 MPa</td
Stress at Break ISO 527-1/-2 170 / 105 MPa</td
Strain at Break ISO 527-1/-2 3 / 6 %</td
Flexural Modulus ISO 178 7400 / 4500 MPa</td
Charpy Impact Strength (+23°C) ISO 179/1eU 65 / 90 kJ/m²</td
Charpy Notched Impact (+23°C) ISO 179/1eA 9 / 16 kJ/m²</td

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 221 °C</td
HDT (0.45 MPa) ISO 75 220 °C</td
HDT (1.80 MPa) ISO 75 210 °C</td
Vicat Softening Temperature ISO 306 214 °C</td

Electrical Properties

Property Standard Value Unit
Volume Resistivity IEC 62631-3-1 1.0E+13 ohm.m</td
Surface Resistivity IEC 62631-3-1 1.0E+14 ohm</td

Flammability

Property Thickness Standard Rating/Value

UL 94 Flammability

0.75 mm

UL 94

HB</tdFMVSS Burning Rate

1 mm

FMVSS 302

<100 mm/min</td

✅ UL Yellow Card available (E329653-100458649)

🍽️ Food Contact Certified · Safe & Compliant

TECHNYL® SAFE C 216FC V30 BK is Food Contact Certified, suitable for applications requiring direct contact with food:

  • Food Contact Certified: Complies with food contact material regulations
  • UL Yellow Card Certified: E329653-100458649
  • 30% Glass Fiber Reinforced: High rigidity and strength
  • Good Flowability: MVR 45.0 cm³/10min for complex mold designs
  • Excellent Thermal Properties: HDT 210°C @ 1.80MPa
  • RoHS & REACH Compliant: Meets global environmental regulations

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
🔥 Recommended Melt Temperature
250 – 290°C
🏭 Mold Temperature
80 – 100°C
(Up to 120°C for high surface quality)

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

For reinforced polyamides, DOMO recommends using steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).

🎯 Target Applications

🏠 Small/Large Appliances
Coffee machines, water dispensers, dishwasher components
🏭 Industrial Applications
Food processing equipment components
🏗️ Building/Construction
Building hardware, pipe components
🍽️ Consumer Goods
Food contact utensils, kitchen products

📎 Download & Support

※ Click download links to access the complete technical datasheet. For any questions, please contact us.

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL SAFE C 216FC V30 BK, previously DOMAMID 6G30FC 300 BK, Document PID-001442)

Last Updated: June 2026

error: Content is protected !!