TECHNYL® 4EARTH® C2E 216 V35 BK
35% Glass Fiber Reinforced Sustainable PA6 · Recycled Source · High Rigidity · Black Color
♻️ Recycled Source
Tensile Modulus 10500 MPa
High Rigidity
Glass Fiber
Recycled Source
Tensile Modulus (MPa)
Flexural Modulus (MPa)
TECHNYL® 4EARTH® C2E 216 V35 BK is a 35% glass fiber reinforced sustainable polyamide 6 (PA6) grade from recycled source, specifically developed for injection molding. This grade offers excellent rigidity and good impact resistance with a tensile modulus of 10500 MPa, making it an ideal sustainable material choice for high-rigidity structural components and industrial applications.
📋 Product Overview
- Polymer Type: PA6 (Polyamide 6)
- Reinforcement: 35% Glass Fiber
- Sustainability Feature: Recycled Source
- Processing: Injection Molding
- Color: Black
- Typical Applications: High-Rigidity Structural Components, Industrial Applications, Automotive Applications
📊 Technical Data Sheet
Mechanical Properties (DAM / Conditioned)
Flammability
♻️ Sustainability · Core Value of 4EARTH Series
TECHNYL® 4EARTH® series is DOMO Chemicals’ flagship sustainable polyamide product line. C2E 216 V35 BK offers the following sustainability features:
- Recycled Source: Uses post-consumer/post-industrial recycled materials, reducing resource consumption
- Reduced Carbon Footprint: Significantly lower carbon footprint compared to virgin PA6-GF35
- Performance Equivalence: Mechanical properties comparable to virgin materials
- High Rigidity: Tensile modulus 10500 MPa for structural applications
- Good Impact Resistance: Notched impact strength 9 kJ/m² (DAM)
⚙️ Processing Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
250 – 290°C
80 – 100°C
(Up to 120°C for high surface quality)
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.
For reinforced polyamides, DOMO recommends using steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).
🎯 Target Applications
Engine surroundings, brackets
Pump bodies, gears, bearings
Metal replacement, lightweight components
Components requiring environmental certification
🔗 Related Products
📎 Download & Support
※ Click download links to access the complete technical datasheet. For any questions, please contact us.
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL 4EARTH C2E 216 V35 BK, Document PID-000888)
Last Updated: June 2026