TECHNYL® ONE J 60X1 V30 BK
High-Performance Polyamide · Ultra-Thin Wall Flame Retardant · Electrical Safety Benchmark Material
30% Glass Fiber
Halogen-Free FR
CTI 600V · PLC 0
TECHNYL® ONE J 60X1 V30 BK is a high-temperature polyamide (PA66/6T copolymer) based material featuring a non-halogenated flame retardant system, reinforced with 30% glass fiber, specifically developed for injection molding. This grade achieves UL94 V0 rating at 0.4mm ultra-thin wall thickness, with unmatched thermal aging properties (150°C electrical RTI) and outstanding electrical characteristics (CTI ≥600V, PLC 0 rating). Compared to traditional high-performance plastics, this product offers superior electrical performance. Its low corrosion characteristic ensures longer processing equipment life, and it is laser welding suitable. This grade is the ideal choice for demanding electrical/electronic applications.
📋 Product Overview
- Polymer Type: PA66/6T Copolymer (High-Temperature Polyamide)
- Reinforcement: 30% Glass Fiber
- Flame Retardant System: Halogen-free & Red Phosphorus-free
- UL94 Rating: V0 at 0.4mm; V0/5VA at 0.75/1.5/3.0mm
- Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
- Thermal Properties: RTI (Electrical) 150°C, Melting Point 295°C
- Processing: Injection Molding
- Special Features: Low corrosion, Laser weldable, High flowability, Excellent surface finish, IR-laser markable
- Colors Available: Black, Grey, Natural, White
- Certifications: RoHS, REACH, UL Yellow Card, EN 45545
- Typical Applications: Electrical/Electronic Applications, Wire/Cable Applications
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (DAM / Conditioned)
Thermal Properties
Electrical Properties
Flammability
✅ UL Yellow Card available (QMF22.E44716)
⚙️ Processing Conditions
80°C
0.12% (recommended 0.08-0.12%)
285 – 295°C
290 – 300°C
290 – 300°C
90 – 110°C
(Up to 120°C for high surface quality)
⚠️ Injection Advice
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours, recommended moisture content ≤0.15%.
All reinforced, flame retardant compounds generate some level of abrasion/corrosion to steel processing equipment. DOMO recommends using steel with high chromium and high carbon content (minimum 16% chromium) for equipment in contact with molten flame retardant compounds. Strictly follow recommended processing conditions to prevent corrosion and ensure product performance.
🎯 Target Applications
📌 Special Certification: This grade is certified to EN 45545 railway standard, suitable for electrical components in railway vehicles.
🌟 Key Advantages
- ✅ Ultra-Thin Wall V0: UL94 V0 rating achieved at 0.4mm; 5VA rating from 0.75mm
- ✅ Excellent Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
- ✅ Superior Thermal Aging Performance: Electrical RTI of 150°C
- ✅ Low Corrosion: Ensures longer processing equipment life and lower maintenance costs
- ✅ Laser Weldable: Supports laser welding processes for simplified assembly
- ✅ High Flowability: Excellent processability, high productivity, supports complex designs
- ✅ Excellent Surface Finish: Good appearance for visible parts
- ✅ IR-Laser Markable: Supports IR laser marking for product traceability
- ✅ Halogen & Red Phosphorus Free: Environmentally friendly, low smoke, low toxicity
- ✅ RoHS & REACH Compliant: Meets global environmental regulations
📌 Material Selection Guide
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL ONE J 60X1 V30 BK, Document PID-001717)
Last Updated: May 2026