首页 » SERVICE » TECHNYL ONE J 60X1 V15 NC

TECHNYL® ONE J 60X1 V15 NC

15% Glass Fiber Reinforced High-Temperature Polyamide · Halogen-Free FR · Electrical Safety Benchmark Material

UL94 V0 @ 0.75mm
15% Glass Fiber
Halogen-Free FR
CTI 600V · PLC 0

TECHNYL® ONE J 60X1 V15 NC is a high-temperature polyamide (PA66/6T copolymer) based material featuring a non-halogenated flame retardant system, reinforced with 15% glass fiber, specifically developed for injection molding. This product offers superior electrical performance compared to traditional high-performance plastics. Its low corrosion characteristic ensures longer processing equipment life. Based on a high fluidity matrix, this product provides strong benefits in productivity and design freedom.

📌 Note: The data provided are based on laboratory/experimental results. These data could be adjusted after industrial production.

📋 Product Overview

  • Polymer Type: PA66/6T Copolymer (High-Temperature Polyamide)
  • Reinforcement: 15% Glass Fiber
  • Flame Retardant System: Halogen-free & Red Phosphorus-free
  • UL94 Rating: V0 at 0.75mm; V0/5VA at 1.5/3.0mm
  • Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
  • Thermal Properties: Melting Point 278°C, HDT 245°C @ 1.8MPa
  • Processing: Injection Molding
  • Special Features: Low corrosion, High flowability, Heat resistant, Halogen-free FR
  • Color: Natural
  • Certifications: RoHS, REACH, UL Yellow Card, EN 45545
  • Typical Applications: Connectors, Electrical/Electronic Applications

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.3 g/cm³
Water Absorption (24h, 23°C) ISO 62 0.75 %
Molding Shrinkage (parallel) ISO 294-4 0.4 – 0.6 %
Molding Shrinkage (normal) ISO 294-4 0.9 – 1.1 %

Mechanical Properties (DAM)

Property Standard Value Unit
Tensile Modulus ISO 527-1/-2 7600 MPa
Stress at Break ISO 527-1/-2 125 MPa
Strain at Break ISO 527-1/-2 3 %
Flexural Modulus ISO 178 6300 MPa
Flexural Strength ISO 178 120 MPa
Charpy Impact Strength (+23°C) ISO 179/1eU 45 kJ/m²
Charpy Notched Impact (+23°C) ISO 179/1eA 7 kJ/m²
Izod Impact Strength (-30°C) ISO 180/1U 8 kJ/m²

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 278 °C
HDT (1.80 MPa) ISO 75 245 °C

Electrical Properties

Property Standard Value Unit/Rating
Comparative Tracking Index (CTI) IEC 60112 600 V
CTI Performance Level IEC 60112 PLC 0 —
Dielectric Strength (1 mm) IEC 60243-1 35 kV/mm

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 V0
UL 94 Flammability 1.5 mm UL 94 V0, 5VA
UL 94 Flammability 3.0 mm UL 94 V0, 5VA
GWFI (0.75/1.5/3.0 mm) — IEC 60695-2-12 960 °C
GWIT (0.75 mm) — IEC 60695-2-13 750 °C
GWIT (1.5 mm) — IEC 60695-2-13 725 °C
GWIT (3.0 mm) — IEC 60695-2-13 775 °C
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min

✅ UL Yellow Card available (QMF22.E44716)

⚙️ Processing Conditions

🌡️ Drying Temperature/Time
80°C / 2-4h
Dew point ≥ -20°C
💧 Max Moisture
0.12% (recommended 0.08-0.12%)
🔥 Rear Temperature
285 – 295°C
🔥 Middle Temperature
290 – 300°C
🔥 Front Temperature
290 – 300°C
🏭 Mold Temperature
90 – 110°C
(Up to 120°C for high surface quality)

⚠️ Injection Advice

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours, recommended moisture content ≤0.15%.

All reinforced, flame retardant compounds generate some level of abrasion/corrosion to steel processing equipment. DOMO recommends using steel with high chromium and high carbon content (minimum 16% chromium) for equipment in contact with molten flame retardant compounds. Strictly follow recommended processing conditions to prevent corrosion and ensure product performance.

🎯 Target Applications

🔌 Connectors
⚡ Electrical/Electronic Applications
🔋 Electrical Protection Devices
🚆 Railway Electrical Components

📌 Special Certification: This grade is certified to EN 45545 railway standard, suitable for electrical components in railway vehicles.

🌟 Key Advantages

  • ✅ UL94 V0 Flammability: V0 at 0.75mm; 5VA rating from 1.5mm
  • ✅ Excellent Electrical Properties: CTI 600V (PLC 0), Dielectric Strength 35 kV/mm
  • ✅ High Heat Deflection Temperature: HDT of 245°C at 1.8MPa
  • ✅ Low Corrosion: Ensures longer processing equipment life and lower maintenance costs
  • ✅ High Flowability: Excellent processability, high productivity, supports complex designs
  • ✅ 15% Glass Fiber Reinforcement: Good balance of rigidity and strength
  • ✅ Halogen & Red Phosphorus Free: Environmentally friendly, low smoke, low toxicity
  • ✅ EN 45545 Railway Certified: Suitable for railway applications
  • ✅ RoHS & REACH Compliant: Meets global environmental regulations

📌 Material Selection Guide

Component Recommended Grade Key Properties
Connectors ONE J 60X1 V15 NC CTI 600V, V0 @ 0.75mm, high heat resistance
Electrical Protection Devices ONE J 60X1 V15 NC High CTI, high dielectric strength, 5VA rating
Railway Electrical Components ONE J 60X1 V15 NC EN 45545 certified, low smoke, low toxicity

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL ONE J 60X1 V15 NC, Document PID-001716)

Last Updated: May 2026

📢 Note: Data based on laboratory/experimental results; may be adjusted after industrial production.

error: Content is protected !!