首页 » TECHNYL » PROTECT » TECHNYL PROTECT C 60G1 V30 BK

TECHNYL® PROTECT C 60G1 V30 BK

30% Glass Fiber Reinforced · Halogen-Free FR · High Rigidity & Electrical Safety

UL94 V0
30% Glass Fiber
Halogen & Red P Free
Heat-Aging Stabilized

TECHNYL® PROTECT C 60G1 V30 BK (previously DOMAMID FR 6G30VOE BK) is a 30% glass fiber reinforced polyamide 6 (PA6) compound, featuring a halogen-free and red phosphorus-free flame retardant system with heat-aging stabilization. Specifically developed for injection molding applications, this grade delivers exceptional mechanical strength, outstanding electrical safety, and excellent flame retardancy, making it an ideal material choice for high-voltage connectors, EV charging components, and electrical protection devices.

📋 Product Overview

  • Polymer Type: PA6 (Polyamide 6)
  • Reinforcement: 30% Glass Fiber
  • Flame Retardant System: Halogen-free & Red Phosphorus-free
  • Heat-Aging Stabilized: Yes
  • UL94 Rating: V0 at 0.75mm / 1.5mm / 3.0mm
  • Processing: Injection Molding
  • Colors Available: Black, Grey, Natural
  • Certifications: RoHS, REACH, UL Yellow Card

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.42 g/cm³
Molding Shrinkage (parallel) ISO 294-4 0.2 – 0.4 %
Molding Shrinkage (normal) ISO 294-4 0.6 – 0.8 %
Viscosity Number ISO 307 145 cm³/g

Mechanical Properties (DAM / Conditioned)

Property Standard Value (DAM / Cond.) Unit
Tensile Modulus ISO 527-1/-2 11000 / 7000 MPa
Stress at Break ISO 527-1/-2 140 / 95 MPa
Strain at Break ISO 527-1/-2 2.5 / 3.5 %
Flexural Modulus ISO 178 10000 / 6500 MPa
Flexural Strength ISO 178 210 / 140 MPa
Charpy Impact Strength (+23°C) ISO 179/1eU 50 / 55 kJ/m²
Charpy Notched Impact (+23°C) ISO 179/1eA 8 / 11 kJ/m²
Izod Notched Impact (+23°C) ISO 180/1A 8 / 10 kJ/m²

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 221 °C
HDT (0.45 MPa) ISO 75 215 °C
HDT (1.80 MPa) ISO 75 205 °C
Vicat Softening Temperature ISO 306 210 °C

Electrical Properties

Property Standard Value Unit
Volume Resistivity IEC 62631-3-1 1E+016 ohm.m
Surface Resistivity IEC 62631-3-1 1E+014 ohm
Comparative Tracking Index (CTI) IEC 60112 600 V
Dielectric Strength (1 mm) IEC 60243-1 31 kV/mm

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 V0
UL 94 Flammability 1.5 mm UL 94 V0
UL 94 Flammability 3.0 mm UL 94 V0
GWFI (1-3 mm) — IEC 60695-2-12 960 °C
GWIT (1-3 mm) — IEC 60695-2-13 775 °C
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min

✅ UL Yellow Card available (E170540-103930220)

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4h
Dew point ≤ -30°C
🔥 Recommended Melt Temperature
240 – 270°C
🏭 Recommended Mold Temperature
80 – 100°C

⚠️ Injection Advice

All reinforced, flame retardant compounds generate some level of abrasion/corrosion to steel processing equipment. DOMO recommends using steel with high chromium and high carbon content (minimum 16% chromium) for equipment in contact with molten flame retardant compounds. Strictly follow recommended processing conditions to prevent corrosion and ensure product performance.

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

🎯 Target Applications

🔌 High-Voltage Connectors
⚡ EV Charging Components
🔋 High-Voltage Systems
🏭 Electrical Protection Devices
🔧 Circuit Breakers
📡 PV Junction Boxes

🌟 Key Advantages

  • ✅ High Rigidity & Strength: 30% glass fiber reinforcement, tensile modulus up to 11000 MPa
  • ✅ UL94 V0 Flammability: V0 rating achieved at 0.75mm thin wall
  • ✅ Halogen & Red Phosphorus Free: Environmentally friendly, low corrosion, low smoke
  • ✅ High CTI (600V): Excellent tracking resistance, PLC 0 rating
  • ✅ High Heat Deflection Temperature: HDT of 205°C at 1.8MPa
  • ✅ Heat-Aging Stabilized: Long-term thermal aging resistance
  • ✅ Excellent Dielectric Strength: 31 kV/mm
  • ✅ RoHS & REACH Compliant: Meets global environmental regulations

📌 Material Selection Guide

Component Recommended Grade Key Properties
Charging Gun Housing/Shell C 60G1 V30 BK High rigidity, high CTI, V0 rating
High-Voltage Connectors C 60G1 V30 BK High CTI, high strength, dimensional stability
Electrical Protection Devices C 60G1 V30 BK V0 flammability, high dielectric strength

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL PROTECT C 60G1 V30 BK, Document 000448)

Last Updated: May 2026

error: Content is protected !!