TECHNYL® PROTECT A 60G1 V30 BK-K
High-Performance Flame-Retardant Polyamide · Asia Availability Only
30% Glass Fiber
Halogen & Red P Free
Asia Only
TECHNYL® PROTECT A 60G1 V30 BK-K is a 30% glass fiber reinforced polyamide 66 (PA66) compound, featuring a halogen-free and red phosphorus-free flame retardant system with heat stabilization. Specifically developed for injection molding applications, this grade is available exclusively for the Asian market. It delivers an exceptional balance of mechanical strength, thermal resistance, and electrical safety, making it an ideal choice for high-voltage connectors, EV charging components, and demanding electrical applications.
📋 Product Overview
- Polymer Type: PA66 (Polyamide 66)
- Reinforcement: 30% Glass Fiber
- Flame Retardant: Halogen-free & Red Phosphorus-free
- Heat Stabilized: Yes
- UL94 Rating: V0 at 0.75mm and 1.5mm
- Processing: Injection Molding
- Availability: Asia Only
- Certifications: RoHS, REACH, UL Yellow Card
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (DAM)
Thermal Properties
Flammability
✅ UL Yellow Card available (E170540)
⚙️ Processing Conditions
75-85°C / 2-4h
Dew point ≤ -30°C
270 – 290°C
80 – 100°C
(Up to 120°C for high surface quality)
0.2%
⚠️ Injection Advice
All reinforced, flame retardant compounds generate some level of abrasion/corrosion to steel processing equipment. DOMO recommends using steel with high chromium and high carbon content (minimum 16% chromium) for equipment in contact with molten flame retardant compounds. Strictly follow recommended processing conditions to prevent corrosion and ensure product performance.
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.
🎯 Target Applications
📌 Note: This grade is available exclusively for the Asian market (including China, Japan, Korea, Southeast Asia, etc.). For other regions, please contact DOMO Chemicals for equivalent alternatives.
🌟 Key Advantages
- ✅ UL94 V0 at 0.75mm: Exceptional thin-wall flame retardancy
- ✅ 30% Glass Fiber: High rigidity and dimensional stability
- ✅ Halogen & Red P Free: Environmentally friendly, low corrosion, low smoke
- ✅ High HDT (230°C @1.8MPa): Suitable for high-temperature applications
- ✅ Heat Stabilized: Long-term thermal aging resistance
- ✅ RoHS & REACH Compliant: Meets global environmental regulations
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL PROTECT A 60G1 V30 BK-K, Document 002309)
Last Updated: May 2026