TECHNYL® A 219 V30 NC
30% Glass Fiber Reinforced PA66 · Improved Hydrolysis Resistance · Electrolytic Corrosion Resistant · Natural Color
Improved Hydrolysis
Electrolytic Corrosion Resistant
Heat Stabilized
TECHNYL® A 219 V30 NC (previously Technyl A 218W V30 NATURAL TE / DOMAMID 66G30H1 NC) is a 30% glass fiber reinforced polyamide 66 (PA66) grade with heat stabilization, specifically developed for injection molding. This grade offers improved hydrolysis resistance as well as an excellent combination of thermal and mechanical properties. It also restricts electrolytic corrosion. It is an ideal material choice for consumer applications and other demanding environments.
📋 Product Overview
- Polymer Type: PA66 (Polyamide 66)
- Reinforcement: 30% Glass Fiber
- Heat Stabilized: Yes
- Flammability Rating: UL94 HB (0.75/1.5/3.0mm)
- Processing: Injection Molding
- Colors Available: Black, Natural
- Typical Applications: Consumer Applications
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (DAM / Conditioned)
Electrical Properties
Flammability
💧 Improved Hydrolysis Resistance · Electrolytic Corrosion Resistant
TECHNYL® A 219 V30 NC offers the following unique advantages compared to standard PA66-GF30:
- Improved Hydrolysis Resistance: Maintains better mechanical properties in humid environments
- Electrolytic Corrosion Resistant: Inhibits electrolytic corrosion, suitable for applications in contact with metals
- High Rigidity: 30% glass fiber reinforcement, tensile modulus up to 10000 MPa
- High Strength: Tensile strength 190 MPa
- Heat Stabilized: Long-term thermal aging resistance
- Excellent Electrical Properties: CTI 575V (PLC 1), volume resistivity 1.0E+15 ohm.m
⚙️ Processing Conditions
80°C / 2-4 hours
Dew point ≥ -20°C
0.2%
270 – 280°C
275 – 285°C
280 – 290°C
70 – 100°C
⚠️ Injection Advice
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.
For reinforced polyamides, DOMO recommends the use of steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).
🎯 Target Applications
Home appliance components, sports equipment
Structural parts, connectors
Engine surrounding components (hydrolysis-prone environments)
🌟 Key Advantages
- ✅ Improved Hydrolysis Resistance: Better property retention in humid environments
- ✅ Electrolytic Corrosion Resistant: Inhibits electrolytic corrosion for metal contact applications
- ✅ High Rigidity: 30% glass fiber reinforcement, tensile modulus 10000 MPa
- ✅ High Strength: Tensile strength 190 MPa
- ✅ Heat Stabilized: Long-term thermal aging resistance
- ✅ Excellent Electrical Properties: CTI 575V (PLC 1), volume resistivity 1.0E+15 ohm.m
- ✅ Good Impact Resistance: Charpy notched impact strength 11 kJ/m² (DAM)
- ✅ Low Water Absorption: Only 0.8% water absorption in 24h
- ✅ RoHS & REACH Compliant: Meets global environmental regulations
📌 Material Selection Guide
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL A 219 V30 NC, previously Technyl A 218W V30 NATURAL TE / DOMAMID 66G30H1 NC, Document PID-001759)
Last Updated: June 2026