首页 » SERVICE » TECHNYL SAFE A 219FC V30 BK

TECHNYL® SAFE A 219FC V30 BK

30% Glass Fiber Reinforced PA66 · Food Contact Approved · Hydrolysis Stabilized

30% Glass Fiber
Food Contact Approved
Hydrolysis Stabilized
Organic Heat Stabilized

TECHNYL® SAFE A 219FC V30 BK is a 30% glass fiber reinforced polyamide 66 (PA66) grade with organic heat stabilizer, food contact approved, specifically developed for injection molding. Designed for molded parts requiring an excellent combination of thermal and mechanical properties, good hydrolysis resistance, and food contact compliance in industrial, consumer goods, and appliance applications.

📋 Product Overview

  • Polymer Type: PA66 (Polyamide 66)
  • Reinforcement: 30% Glass Fiber
  • Heat Stabilization: Organic heat stabilizer
  • Food Contact Approved: Yes
  • Hydrolysis Stabilized: Yes
  • Flammability Rating: UL94 HB (0.75/1.5/3.0mm)
  • Processing: Injection Molding
  • Colors Available: Black, Natural
  • Certifications: RoHS, REACH, UL Yellow Card
  • Typical Applications: Consumer applications, White goods/Small appliances, Industrial applications

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.36 g/cm³
Humidity Absorption (23°C / 50% RH) ISO 62 2.2 – 2.4 %
Water Absorption (24h, 23°C) ISO 62 0.8 %
Water Absorption (saturation) ISO 62 5.3 %
Molding Shrinkage (parallel) ISO 294-4 0.3 – 0.4 %
Molding Shrinkage (normal) ISO 294-4 0.9 – 1.1 %

Mechanical Properties (DAM / Conditioned)

Property Standard Value (DAM / Cond.) Unit
Tensile Modulus ISO 527-1/-2 10000 / 7500 MPa
Stress at Break ISO 527-1/-2 185 / 130 MPa
Strain at Break ISO 527-1/-2 3 / 7 %
Flexural Modulus (ISO) ISO 178 9000 / 6400 MPa
Flexural Strength (ISO) ISO 178 275 / 180 MPa
Charpy Impact Strength (+23°C) ISO 179/1eU 75 / 85 kJ/m²
Charpy Notched Impact (+23°C) ISO 179/1eA 11 / 15 kJ/m²
Izod Impact Strength (+23°C) ISO 180/1U 70 / 80 kJ/m²
Izod Notched Impact (+23°C) ISO 180/1A 10 / 13 kJ/m²

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 261 °C
HDT (0.45 MPa) ISO 75 260 °C
HDT (1.80 MPa) ISO 75 255 °C

Electrical Properties

Property Standard Value Unit/Rating
Volume Resistivity IEC 62631-3-1 1.0E+13 ohm.m
Surface Resistivity IEC 62631-3-1 1.0E+15 ohm
Comparative Tracking Index (CTI) IEC 60112 400 V
CTI Performance Level IEC 60112 PLC 1 —
Dielectric Strength IEC 60243-1 35 kV/mm

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 HB
UL 94 Flammability 1.5 mm UL 94 HB
UL 94 Flammability 3.0 mm UL 94 HB
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min

✅ UL Yellow Card available (E44716)

🍽️ Food Contact Approved · Safe & Compliant

TECHNYL® SAFE A 219FC V30 BK is food contact approved, suitable for applications requiring direct contact with food. This grade features organic heat stabilizer with no heavy metals, ensuring food safety compliance.

  • Food Contact Compliant: Meets EU and international food contact material regulations
  • Organic Heat Stabilization: Heavy metal-free, safe and reliable
  • Hydrolysis Stabilized: Maintains excellent performance in humid environments
  • RoHS/REACH Compliant: Meets global environmental regulations

🔬 Hydrolysis Stabilized · Long-Term Reliability

TECHNYL® SAFE A 219FC V30 BK features organic heat stabilizer with excellent hydrolysis resistance:

  • Hydrolysis Stabilized: Maintains mechanical properties in hot and humid environments
  • Organic Heat Stabilization: No heavy metal migration risk
  • Excellent Thermal Aging Performance: Suitable for long-term humid conditions
  • Tensile Modulus Retention: Maintains 7500 MPa when conditioned

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
💧 Max Moisture
0.2%
🔥 Rear Temperature
270 – 280°C
🔥 Middle Temperature
275 – 285°C
🔥 Front Temperature
280 – 290°C
🏭 Mold Temperature
70 – 100°C

⚠️ Injection Advice

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

For reinforced polyamides, DOMO recommends the use of steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm). For high surface quality requirements, mold temperature up to 120°C can be considered.

🎯 Target Applications

🏠 White Goods/Small Appliances
Coffee machines, water dispensers, dishwasher components
🍽️ Consumer Goods
Food contact parts, kitchen utensils
🏭 Industrial Applications
Pump bodies, valves, connectors

🌟 Key Advantages

  • ✅ Food Contact Approved: Suitable for direct food contact applications
  • ✅ 30% Glass Fiber Reinforced: Tensile modulus 10000 MPa, high strength & rigidity
  • ✅ Organic Heat Stabilizer: Heavy metal-free, food safety compliant
  • ✅ Hydrolysis Stabilized: Maintains excellent mechanical properties in humid environments
  • ✅ High HDT: 255°C at 1.8MPa
  • ✅ UL Yellow Card Certified: E44716
  • ✅ Excellent Impact Strength: Charpy notched impact 11 kJ/m² (DAM)
  • ✅ Good Electrical Insulation: Dielectric strength 35 kV/mm
  • ✅ RoHS & REACH Compliant: Meets global environmental regulations

📌 Material Selection Guide

Component Recommended Grade Key Properties
Food Contact Parts SAFE A 219FC V30 BK Food contact approved, high strength, hydrolysis resistant
Appliance Structural Parts SAFE A 219FC V30 BK High rigidity, dimensional stability, thermal stability
Industrial Connectors SAFE A 219FC V30 BK High strength, electrical insulation, full certifications

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL SAFE A 219FC V30 BK, Document PID-002611)

Last Updated: May 2026

error: Content is protected !!