TECHNYL® PROTECT C 60G1 V15 BK
15% Glass Reinforced Halogen-Free FR PA6 · UL94 V0 · CTI 600V · GWFI ≥960°C · Black
Halogen-Free FR
V0 @0.75mm
CTI 600V · PLC 0
GWFI ≥960°C
UL94 @0.75mm
CTI (V) · PLC 0
GWFI (°C)
HDT @ 1.80MPa (°C)
TECHNYL® PROTECT C 60G1 V15 BK (formerly DOMAMID FR 6G15VOE BK) is a 15% glass fiber reinforced halogen-free flame retardant Polyamide 6 (PA6) grade with heat-aging stabilization, designed for injection molding. This grade achieves UL94 V0 at 0.75mm thickness while offering CTI 600V PLC 0 and GWFI ≥ 960°C excellent electrical performance. The black version is suitable for connectors, relays, circuit breakers and other E&E applications.
📋 Product Overview
- Product Series: TECHNYL PROTECT Flame Retardant Series
- Former Name: DOMAMID FR 6G15VOE BK
- Polymer Type: PA6 (Polyamide 6)
- Reinforcement: 15% Glass Fiber
- Flame Retardant System: Halogen-Free, Red Phosphorus Free
- UL94 Rating: V0 (0.75mm)
- Glow Wire Performance: GWFI ≥ 960°C (1-3mm), GWIT 750°C (1-3mm)
- CTI: 600V (PLC 0)
- Heat Stabilization: Heat-aging stabilized
- Thermal Performance: Melting Point 221°C, HDT 190°C @ 1.80MPa, 205°C @ 0.45MPa, Vicat Softening Point 200°C
- Mechanical Performance: Tensile Modulus 6500 MPa, Stress at Break 105 MPa, Strain at Break 4%
- Impact Performance: Charpy Notched Impact 6.5 kJ/m² (dry), improves to 12 kJ/m² when conditioned
- Processing: Injection Molding
- Color: Black
- Certifications: RoHS, UL Yellow Card (E170540-532327)
- Typical Applications: Connectors, relays, circuit breakers, E&E components
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (Dry / Conditioned)
Thermal Properties
Electrical Properties
Flammability
✅ UL Yellow Card available (E170540-532327)
🌟 Key Advantages
- ✅ Halogen-Free FR: UL94 V0 @0.75mm, halogen-free, red phosphorus free
- ✅ Excellent Glow Wire Performance: GWFI ≥ 960°C, GWIT 750°C
- ✅ High CTI: 600V (PLC 0) for excellent electrical insulation
- ✅ Heat-Aging Stabilized: Outstanding long-term thermal aging resistance
- ✅ 15% Glass Reinforcement: Good balance of rigidity and strength
- ✅ Good Impact Performance: Notched impact improves to 12 kJ/m² when conditioned
- ✅ Good Flowability: Suitable for injection molding
- ✅ Black Color: Meets industrial application requirements
- ✅ RoHS Compliant: Meets environmental regulations
⚙️ Processing Conditions
75 – 85°C / 2-4 hours
Dew point ≤ -30°C
240 – 270°C
80 – 100°C
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment, dew point minimum -20°C, recommended time 2-4 hours.
These parameters are typical of the product but should be related to the type of machinery used and to the type of moulded part.
🎯 Typical Applications
Electrical connectors, terminals
Electrical protection components
FR structural parts
🔗 Related Products
📎 Download & Technical Support
※ Click to download the complete technical datasheet. For inquiries, please contact us.
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. DOMO accepts no responsibility for results obtained by the application of this information or for the safety and suitability of our products. Users are advised to make their own tests to determine the safety and suitability of each product for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, the grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Datasheet (TECHNYL PROTECT C 60G1 V15 BK, formerly DOMAMID FR 6G15VOE BK, Document ID: PID-001152)
Last Updated: June 2026