TECHNYL® MAX A 218 XV65 BK 9290
65% Ultra-High Glass Reinforced Polyamide 66 · Ultra-High Rigidity · Ultra-High Strength · Asia Only · Black
Ultra-High Rigidity
HDT 245°C
25000 MPa
Asia Only
Glass Content
Tensile Modulus (MPa)
Stress at Break (MPa)
Flexural Strength (MPa)
TECHNYL® MAX A 218 XV65 BK 9290 is a 65% ultra-high glass fiber reinforced Polyamide 66 (PA66) grade designed for injection molding. Available in Asia only. This grade offers ultra-high rigidity and strength with tensile modulus up to 25000 MPa and flexural strength of 360 MPa, making it an ideal choice for metal replacement. The black version is suitable for automotive components and ultra-high strength structural applications.
📋 Product Overview
- Polymer Type: PA66 (Polyamide 66)
- Reinforcement: 65% Ultra-High Glass Fiber
- Availability: Asia Only
- Flammability: FMVSS compliant (<100 mm/min)
- Electrical Performance: Volume Resistivity 1.0E10 ohm.m
- Thermal Performance: Melting Point 260°C, HDT 245°C @ 1.80MPa, 257°C @ 0.45MPa, Vicat Softening Point 230°C
- Mechanical Performance: Tensile Modulus 25000 MPa, Stress at Break 250 MPa, Strain at Break 2%
- Flexural Performance: Flexural Modulus 21000 MPa, Flexural Strength 360 MPa
- Impact Performance: Charpy Notched Impact 20 kJ/m², Izod Notched Impact 20 kJ/m²
- Processing: Injection Molding
- Color: Black
- Certifications: RoHS, REACH
- Typical Applications: Automotive components, ultra-high strength structural parts, metal replacement
📊 Technical Data Sheet
Physical Properties
Mechanical Properties (Dry)
Thermal Properties
Electrical Properties
Flammability
🌏 This grade is available in Asia only.
🌟 Key Advantages
- ✅ 65% Ultra-High Glass Reinforcement: Tensile modulus up to 25000 MPa, ideal for metal replacement
- ✅ Ultra-High Strength: Stress at Break 250 MPa, Flexural Strength 360 MPa
- ✅ Extremely High Heat Resistance: HDT 245°C @ 1.80MPa, Melting Point 260°C
- ✅ Good Impact Performance: Notched impact strength 20 kJ/m²
- ✅ Excellent Dimensional Stability: Extremely low shrinkage, ultra-high dimensional accuracy
- ✅ Black Color: Meets industrial application requirements
- ✅ Asia Only: Specifically designed for the Asian market
- ✅ RoHS/REACH Compliant: Meets global environmental regulations
⚙️ Processing Conditions
75 – 85°C / 2-4 hours
Dew point ≤ -30°C
280 – 305°C
70 – 100°C
(Up to 120°C for high surface quality)
The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment, dew point minimum -30°C, recommended time 2-4 hours.
For ultra-high reinforced polyamides, DOMO recommends the use of high wear-resistant steel to avoid or reduce abrasion. Strictly follow recommended processing conditions to ensure optimal performance.
🎯 Typical Applications
Metal replacement, structural parts
Load-bearing components, brackets
High rigidity, high strength components
🔗 Related Products
📎 Download & Technical Support
※ Click to download the complete technical datasheet. For inquiries, please contact us.
Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. DOMO accepts no responsibility for results obtained by the application of this information or for the safety and suitability of our products. Users are advised to make their own tests to determine the safety and suitability of each product for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, the grade is not suitable for pharmaceutical/medical applications.
Source: DOMO Chemicals Official Technical Datasheet (TECHNYL MAX A 218 XV65 BK 9290, Document ID: 002275)
Last Updated: June 2026