TECHNYL PROTECT C 60G1 V15 BK – 15% Glass Fiber Reinforced, Halogen & Red Phosphorus Free Flame-Retardant PA6

1. Core Basic Information

• Product Category: Engineering Plastics (PA6/Nylon 6)
• Core Composition: PA6 base material + 15% glass fiber reinforcement + halogen & red phosphorus free flame retardant system, heat-ageing stabilized
• Appearance: Black (BK) pellets, standard packaging 25KG/bag
• Processing Method: Injection molding, suitable for medium-complexity structural and functional parts
• Environmental Compliance: Halogen & red phosphorus free, low smoke density and toxicity, free of harmful halogens, red phosphorus and PBDEs, compliant with RoHS and REACH directives; COA, MSDS, UL Yellow Card and other qualification documents availableDOMO Chemicals

2. Core Performance Highlights

• Flame Retardancy: UL94 V-0 rating (1.6mm), self-extinguishes immediately after flame removal with no dripping ignition risk; Glow Wire Flammability Index up to 960℃ (0.8mm), outstanding fire safety; low smoke density and toxicity, ideal for confined spaces and high-safety-level applicationsDOMO Chemicals。
• Mechanical Properties: Density 1.28g/cm³, tensile strength 125MPa (dry), flexural modulus 5500MPa (dry), Izod notched impact strength 6.5kJ/m² (dry); 15% glass fiber reinforcement balances high strength and toughness, with excellent fatigue and creep resistance, good dimensional stability and reduced warpage。
• Thermal Properties: Melting temperature 225℃, heat distortion temperature 190℃ at 1.8MPa load, long-term continuous service temperature 140℃; excellent thermal stability and ageing resistance, low performance degradation under prolonged high temperature, suitable for engine compartments, PDU boxes and other medium-to-high temperature environments。
• Electrical Properties: Comparative Tracking Index (CTI) ≥ 600V, excellent electrical insulation, high volume resistivity and low dielectric loss; phosphorus-free formulation eliminates tracking risks, ideal for high-voltage connectors, circuit breakers, charging piles and other high-voltage electrical components。
• Processability & Chemical Resistance: Excellent fluidity, short cycle time and high surface finish, suitable for thin-wall and medium-complexity parts; resistant to oil, fuel, coolant and common solvents, suitable for automotive oil circuits, cooling systems and industrial hydraulic components; phosphorus-free flame retardant system reduces mold corrosion, extending equipment service life。

3. Core Application Scenarios

• Electrical & Electronic: High-voltage connectors, terminal blocks, relay bases, circuit breaker housings, photovoltaic junction boxes, charging pile modules, sensor brackets, coil bobbins, etc., especially for precision electrical components requiring high voltage, flame retardancy and low smoke。
• New Energy Automotive: New energy vehicle Power Distribution Units (PDU), battery module brackets, charging gun housings, motor insulation end covers; traditional fuel vehicle engine compartment electrical components, fuel system housings, cooling system parts, etc。
• Industrial Machinery: High-strength flame-retardant structural parts, valve housings, pump components, bearing seats, transmission gear supports, electrical control box components, etc., suitable for complex working conditions requiring stress resistance, flame retardancy and temperature resistance。

4. Practical Reference

• Drying: 80℃ for 4-6 hours, target moisture content ≤ 0.2% to avoid bubbles and hydrolysis.
• Barrel Temp: Rear 230-235℃, Middle 235-240℃, Front 240-245℃; Nozzle 235-240℃.
• Mold Temp: 60-80℃; Injection Pressure 80-120MPa, Holding Pressure 50-60% of injection pressure, Cooling Time 20-30 seconds (adjust by wall thickness).
• Color & Decoration: Custom coloring available, laser marking for traceability, meeting appearance and identification needsDOMO Chemicals。

5. Summary of Core Advantages