首页 » TECHNYL » 4EARTH » TECHNYL 4EARTH C2E 219 MT20 V10 BK H


TECHNYL® 4EARTH® C2E 219 MT20 V10 BK H

30% Glass Fiber/Mineral Reinforced Sustainable PA6 · Recycled Source · Low Warpage · Black Color

10% GF+20% Mineral
♻️ Recycled Source
Low Warpage
MVR 75 High Flow

30%
Mineral+GF
♻️
Recycled Source
6000
Tensile Modulus (MPa)
75
MVR (cm³/10min)

TECHNYL® 4EARTH® C2E 219 MT20 V10 BK H (previously ECONAMID FL 6GM3010H1 BK) is a 30% glass fiber/mineral reinforced sustainable polyamide 6 (PA6) grade from recycled source, with heat-aging stabilization, specifically developed for injection molding. This grade offers low warpage characteristics and excellent dimensional stability while maintaining good mechanical properties and flowability, making it an ideal sustainable material choice for precision structural components requiring dimensional stability.

📋 Product Overview

  • Polymer Type: PA6 (Polyamide 6)
  • Reinforcement System: 10% Glass Fiber + 20% Mineral
  • Sustainability Feature: Recycled Source
  • Heat Stabilization: Organic heat stabilizer
  • Flammability Rating: UL94 HB (0.75mm)
  • Processing: Injection Molding
  • Color: Black
  • Certifications: RoHS
  • Typical Applications: Dimensional stability-critical parts, low-warpage structural components

📊 Technical Data Sheet

Physical Properties

Property Standard Value Unit
Density ISO 1183 1.36 g/cm³</td
Molding Shrinkage (parallel) ISO 294-4 0.3 – 0.5 %</td
Molding Shrinkage (normal) ISO 294-4 0.7 – 0.9 %</td
MVR (275°C, 5kg) ISO 1133 75.0 cm³/10min</td
Viscosity Number ISO 307 135 cm³/g</td

Mechanical Properties (DAM / Conditioned)

Property Standard Value (DAM / Cond.) Unit
Tensile Modulus ISO 527-1/-2 6000 / 3500 MPa</td
Stress at Break ISO 527-1/-2 100 / 60 MPa</td
Strain at Break ISO 527-1/-2 3 / 10 %</td
Flexural Modulus ISO 178 5300 / – MPa</td
Flexural Strength ISO 178 150 / – MPa</td
Charpy Impact Strength (+23°C) ISO 179/1eU 30 / 90 kJ/m²</td
Charpy Notched Impact (+23°C) ISO 179/1eA 5 / 10 kJ/m²</td
Izod Impact Strength (+23°C) ISO 180/1U 25 / 85 kJ/m²</td
Izod Notched Impact (+23°C) ISO 180/1A 4.5 / 10 kJ/m²</td

Thermal Properties

Property Standard Value Unit
Melting Temperature ISO 11357-1 221 °C</td
HDT (0.45 MPa) ISO 75 205 °C</td
HDT (1.80 MPa) ISO 75 175 °C</td
Vicat Softening Temperature ISO 306 200 °C</td

Electrical Properties

Property Standard Value Unit
Volume Resistivity IEC 62631-3-1 1.0E+13 ohm.m</td
Surface Resistivity IEC 62631-3-1 1.0E+13 ohm</td

Flammability

Property Thickness Standard Rating/Value
UL 94 Flammability 0.75 mm UL 94 HB</td
FMVSS Burning Rate 1 mm FMVSS 302 <100 mm/min</td

📐 Low Warpage & Dimensional Stability · Advantage of Hybrid Reinforcement

TECHNYL® 4EARTH® C2E 219 MT20 V10 BK H features a hybrid glass fiber and mineral reinforcement system, offering the following advantages:

  • Low Warpage: Mineral filler effectively reduces anisotropic shrinkage caused by glass fiber reinforcement, ensuring excellent dimensional stability
  • Good Rigidity: Tensile modulus 6000 MPa, flexural modulus 5300 MPa
  • High Flowability: MVR 75.0 cm³/10min for complex mold designs
  • Recycled Source: Uses post-consumer/post-industrial recycled materials, reducing environmental footprint
  • Heat Stabilized: Organic heat stabilizer for long-term thermal aging resistance
  • Good Surface Finish: Mineral filler improves surface smoothness

⚙️ Processing Conditions

🌡️ Drying Conditions
75-85°C / 2-4 hours
Dew point ≤ -30°C
🔥 Recommended Melt Temperature
240 – 270°C
🏭 Mold Temperature
80 – 90°C
(Up to 120°C for high surface quality)

The material is supplied in airtight bags, ready for use. If the virgin material has absorbed moisture, it must be dried with dehumidified air drying equipment (dew point minimum -20°C). Recommended drying time: 2-4 hours.

For reinforced polyamides, DOMO recommends using steel with high carbon content, purified for polishing, to avoid or limit abrasion. For example: X38CrMoV5-1 (EN Norm) – 1.2367/1.2343 (DIN Norm) or X160CrMoV12 – 1.2601/1.2379 (DIN Norm).

🎯 Target Applications

📐 Dimensional Stability Parts
Precision structural components, housings
🔧 Industrial Components
Pump bodies, valve bodies, brackets
🚗 Automotive Applications
Interior parts, structural components
♻️ Sustainable Applications
Components requiring environmental certification

📎 Download & Support

※ Click download links to access the complete technical datasheet. For any questions, please contact us.

Disclaimer: The information provided in this documentation corresponds to our technical knowledge at the date of its publication and does not constitute a specification. DOMO cannot anticipate all conditions under which this information and our products may be used. Users are advised to make their own tests to determine the safety and suitability for their own purposes. Unless otherwise agreed in writing, DOMO sells the product without warranties. Unless specifically indicated, this grade is not suitable for pharmaceutical/medical applications.

Source: DOMO Chemicals Official Technical Data Sheet (TECHNYL 4EARTH C2E 219 MT20 V10 BK H, previously ECONAMID FL 6GM3010H1 BK, Document PID-000077)

Last Updated: June 2026

error: Content is protected !!